|
All Guns Are Inherently
Dangerous And Should Only Be Handled By Qualified Individuals Trained In Proper Safety
Procedures!
Clean The Magazine First
Make The Gun Safe
Compress Magazine Spring
Lock Magazine Spring
Remove Magazine Spring
Clean Inside Magazine
Clean The Spring
Wipe Inside Magazine
Remove Rag
Reinstall Spring
Recompress Spring
Insert Follower
Apply Oil
Clean The Gun Itself
Make The Gun Safe
Engage The Slide Lock
Remove Barrel Bushing
Remove Slide Lock
Remove Slide
Remove Firing-Pin
Remove Extractor
Clean Extractor
Clean Breech Face
Clean Feed Ramp
Clean And Reassemble
Position Barrel Link
Install Slide Lock
Complete Reassembly
Check Proper Functioning |
Use a small
nail to hold the compressed spring in the magazine in a compressed state that gives enough
room to drop the follower back into the magazine. After the follower is in place,
point the magazine in a safe direction (strait down against your work bench) and remove
the nail and the spring will uncompress quickly. Be careful. |
. |
|
