|
All Guns Are Inherently
Dangerous And Should Only Be Handled By Qualified Individuals Trained In Proper Safety
Procedures!
Clean The Magazine First
Make The Gun Safe
Compress Magazine Spring
Lock Magazine Spring
Remove Magazine Spring
Clean Inside Magazine
Clean The Spring
Wipe Inside Magazine
Remove Rag
Reinstall Spring
Recompress Spring
Insert Follower
Apply Oil
Clean The Gun Itself
Make The Gun Safe
Engage The Slide Lock
Remove Barrel Bushing
Remove Slide Lock
Remove Slide
Remove Firing-Pin
Remove Extractor
Clean Extractor
Clean Breech Face
Clean Feed Ramp
Clean And Reassemble
Position Barrel Link
Install Slide Lock
Complete Reassembly
Check Proper Functioning |
Disengage
the safety and with gun pointed in safe direction, remove the slide lock. The small cut
(not the large cut) in the slide must be aligned with the lock itself. Push the
slide lock through from the opposite side of the gun. Go slow and be very careful not
to scratch the side of the frame with the slide lock. This can be accomplished by
wiggling it very small arcs as you remove it. Keep your index finger (trigger finger)
strait and off the trigger of the gun at all times.
|
. |
|
