All Guns Are Inherently
Dangerous And Should Only Be Handled By Qualified Individuals Trained In Proper Safety
Procedures!
Clean The Magazine First
Make The Gun Safe
Compress Magazine Spring
Lock Magazine Spring
Remove Magazine Spring
Clean Inside Magazine
Clean The Spring
Wipe Inside Magazine
Remove Rag
Reinstall Spring
Recompress Spring
Insert Follower
Apply Oil
Clean The Gun Itself
Make The Gun Safe
Engage The Slide Lock
Remove Barrel Bushing
Remove Slide Lock
Remove Slide
Remove Firing-Pin
Remove Extractor
Clean Extractor
Clean Breech Face
Clean Feed Ramp
Clean And Reassemble
Position Barrel Link
Install Slide Lock
Complete Reassembly
Check Proper Functioning |
The slide
lock is tricky to install. Slowly move the slide back and forth as necessary until
the small ring (barrel link) is visible and gently insert the slide lock pin. After the
slide lock is initially inserted, line the slide lock up with the small notch in the
slide, not the large notch to complete insertion. Be careful not to scratch
the gun and if it doesn't work, it's a good idea to remove the slide, and try again. It's
definitely one of the cool adventures in the gun world so feel proud when you get it back
together. Go slow and you will succeed. When the slide lock
is in place, engage the safety to lock the slide in place.
. |
back Complete Reassembly
next |
|
| Finally, complete reassembly
by recompressing the recoil spring and rotating the barrel bushing in reverse to lock
everything back togther. |
|
